Setting the Signal Format (Format Menu)
To set the format, that is, the frame frequency and number of scan lines handled
by each device, use the System >Format menu.
To display the Format menu
In the Engineering Setup menu, select VF1 'System' and HF3 'Format.'
Note
After changing any of the following settings, be sure to press [Execute] to save
the new values. If you want to cancel the settings and return to the original
state, press [Clear] without pressing [Execute].
Setting the Signal Format
Specify the signal format to be handled by the devices.
The combinations of signal formats that can be selected are as follows.
System
SD system
1
In the System >Format menu, select the device for operations.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
2
Press [Signal Format].
A pop-up window appears.
Field frequency
59.94
50
Parameter
Adjustment
Device
Selection of device for operations
Effective number of scan lines
480i
576i
Setting values
1 and upwards
Setting the Signal Format (Format Menu)
981