Table of Contents
Advertisement
4.8.5
Gear replacement
１
Turn off the power supply.
２
Referring to 4.8.2 Drive unit replacement procedure and remove the drive unit.
[Caution]
When the drive unit is removed, the springs on the pump head (4 pieces) are freed
causing the internal parts (diaphragms) elongated.
To avoid this, put the drive unit back to its place approximately within 30 minutes.
３
Remove the fixing screws (2 positions) and take out the pump cover.
Motor
4
Referring to 4.8.4 Motor replacement, remove the motor.
5
Hold the D-cut of the drive shaft by spanner and remove the hex. head bolt near the gear.
6
Shift the drive shaft as shown by an arrow and remove the shaft from the bearing.
Spanner
Hex. head bolt
Fixing screws
4-27
Pump cover
Pull out
- Quick Links:
- Troubleshooting List
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Hitachi IJ UX
Related Products for Hitachi IJ UX
- Hitachi IJ PH
- Hitachi IJ RX2
- Hitachi IJ UX2
- Hitachi IPJ-AW250N
- Hitachi Innovate iPJ-AW250NM
- Hitachi IC25N040ATCS04-0 - Travelstar 40GN 40GB UDMA/100 4200RPM 2MB 2.5" IDE Hard Drive
- Hitachi IC25N080ATMR04-0 - 3E034 - Dell 80GB Laptop Hard Drive
- Hitachi IC25N040ATMR04-0 - Travelstar 40GB Laptop Hard Drive 9.5mm 2.5 Inch Notebook HDD