Bosch DCN Next Generation Installation & User's Instructions page 119
Digital congress network
Hide thumbs
Also See for DCN Next Generation:
- Installation and operation manual (286 pages) ,
- Operation manual (290 pages) ,
- Installation and user instructions manual (158 pages)
Table of Contents
Advertisement
DCN Next Generation | Installation and User Instructions | Central Devices
12.5.10 Defaults
Use the Defaults sub-menu to put back the default
values for all parameters in the configuration menu
(refer to table 11.19).
table 12. 1 4: Defaults sub-menu (* = default)
Menu item
4E
12.5.11 Automatic gain control (AGC)
Use the AGC menu item to enable or disable the AGC
of the audio inputs. If necessary, enable the AGC for the
audio inputs that inject external interpretations in the
system. The AGC makes sure that the nominal level of
the received interpretations is 9 dBV (XLR), -6 dBV
(cinch). When the nominal input of an external
interpretation is high, the audio of the external
interpretations will be too loud compared to the audio
of the 'internal' interpretations from the interpreter
desks.
Note
When channel 00 is attached to an audio input,
the system automatically disables AGC for the
audio input. You cannot manually enable AGC
for an audio input to which channel 00 is
attached.
Note
If two systems are connected by audio
connections (Cobranet, AEX, or DEX), set the
AGC to off.
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
Reset to defaults
Value
No*
Yes
en | 119
Description
Does not put back the
default values.
Sets all parameters to the
default values. The name
is not changed
Advertisement
Table of Contents
