Test Route; Dial Number Test - Bosch solution 6000 Installation Manual
Hide thumbs
Also See for solution 6000:
- User manual (48 pages) ,
- Owner's manual (8 pages) ,
- Quick user manual (2 pages)
Table of Contents
Advertisement
Solution 6000
Installation Manual
Comms > Comms Test >
Test Route
00 - Log Events Only
01 - Dest 1 + Log
02 - Dest 2 + Log
03 - Dest 1 & 2 + Log
04 - Dest 2 If 1 Fails
This menu programs which destination will be used to
send both manual and automatic test reports.
(*** System Wide Parameter ***)
1) Press [MENU] + [5] + [9] + [4]. The keypad will
display the current Test Route.
Test Route
01 - Dest 1 + Log
Press 0-9 OK to SAVE
2) Use the up and down arrow keys to select the Test
Route required then Press [OK] to save and exit or
press [MENU] to exit without saving.
Comms > Comms Test >
Dial Number Test
This option provides a quick and easy way for the Installer
to test the communication path for the panel while they
are onsite without the need to trigger test reports and then
verify them with the base station. Once the telco wiring
has been completed, enter your mobile phone or another
test number into this location and press [OK]. The panel
will then seize the phone line and dial the programmed
number.
1) Press [MENU] + [5] + [9] + [5], then select either
PSTN or GMS communication to test the dialler if
an optional GSM module has been fitted.
GSM
PSTN
Exit
Press OK or MENU
2) Use the numeric keys to enter the the test number.
You can change a single digit in the number by
scrolling the cursor left or right. For special
characters (eg. , = pause * or # etc), use the up and
down arrow keys. To clear all text from the cursor
position to the right, press the [OFF] key.
Enter Digits To Dial
Press OK to SAVE
3) Press [OK] when finished to start the test.
9-26
Comms Programming
MENU 5-9-4
0
1
MENU 5-9-5
The panel will make only one attempt to call this
i
number per activation. To perform multiple tests
Note
repeat the sequence. There is no need to answer the
test call.
» » E N D
O F
S E C T I O N « «
Bosch Security Systems 07/14 BLCC610I
- Quick Links:
- Wiring Diagrams
Hide quick links:
Advertisement
Table of Contents
