Collecting Memory Dump - Hitachi Compute Blade 2000 User Manual

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

 Collecting memory dump

The following screen is displayed during memory dump collection.

Example of Windows Server 2008 R2 or lower

Memory dump is completed when "100% completed" is displayed on the Windows

Server 2012 screen, and when the number on the bottom shows 100 on the screen

of Windows Server 2008 R2 or lower.

Do not issue NMI before memory dump is 100% completed.

If you do, the system may not respond.

If the system does not restart after the memory dump is

100% completed, restart the system manually.

 After collecting memory dump

The collected memory dump is copied to the specified location after the system re-

startup. The default location is "%SystemRoot%¥MEMORY.DMP". Then, the following

event log is output after the memory dump file is copied.

Event ID: 1001

Source: Save Dump for Windows Server 2003 R2

BugCheck for Windows Server 2008 or higher

When you check the memory dump file on MS Explorer, the file is being output if the

file size grows every second by updating. If so, wait until the event log above is

displayed in the system event log.

Chapters

Table of Contents