Connecting Hardware Devices
6
Connect the primary exhaust fan cable to the J-31 SYSTEM FAN connector, and the
redundant fan cable to the J-37 SYSTEM FAN-R connector.
CAUTION: To avoid server damage due to overheating, never connect the exhaust
fan module cable to the redundant exhaust fan connector on the motherboard.
SYSTEM FAN J-31
SYSTEM FAN-R J-37
Fan connectors on the motherboard
7
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 10 in
53.
Cooling fans
Maintenance overview
62
on page