Management Software
Front Panel Indicators screen
This is a function for a Magnia Z300 only. The Magnia Z300 is equipped with an upper
and lower front panel indicator, each displaying up to 16 characters (if a scroll is used, it
displays 40 characters). The front panel indicator has three display screens, and displays
one of them.
These screens can be selected using the Display Change Button. One of the three
screens is used for notification of hardware-dependent errors. This screen is not
displayed during normal operation but is given priority over other screens if an error
occurs.
The other screens are {Panel View 1} and {Panel View 2}.
On {Panel View 1}, information specific to the machine currently selected can be
displayed or edited. {Panel View 2} displays alarm information when an alarm is reported
to the Management Proxy.
When you click Front Panel Indicators, the following screen displays.
Item
Panel View 1
Upper
Lower
Set
Panel View 2
Upper
You can edit the panel strings that indicate information
particular to the agent machine.
Specifies the characters provided on the upper part of the front
panel indicator.
Specifies the characters provided on the lower part of the front
panel indicator.
Saves the specified character strings.
Displays the fault message from the agent.
Displays the characters provided on the upper part of the front
panel indicator.
Explanation
208
Using HarnessEye/web