Table of Contents
Advertisement
1.2.19 Line-2 Mode
This setting is performed when the optional NCU PC Board is installed to use Line 2.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (TX/RX, RECEPTION ONLY, or
(1)
TIMER), then press the [ENTER] key.
LINE-2 MODE
1.TX & RX
2.RECEPTION ONLY
3.TIMER
TX/RX
To use Line 2 for both transmission and reception
RECEPTION ONLY
To use Line 2 always for reception only.
TIMER
To use Line 2 for reception only for a timer period designated.
When "TIMER" is selected, the following screen appears. Use the [←] or [→] keys to
move the cursor to the desired digit, enter a desired value, or alternate AM/PM position.
When the desired time period is displayed, press the [ENTER] key.
RECEPTION ONLY
TIME PERIOD =
00:00 - 00:00
(2)
After the message "OPERATION COMPLETED" is displayed, press the [STOP] key to
return the display to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [1], [16]
4-25
DP120F/DP125F Function Settings
- Quick Links:
- Front View
Hide quick links:
Advertisement
Chapters
Table of Contents
