Table of Contents
Advertisement
2. Preparation
2.1 Preparing Tools
Installation and maintenance of this machine require the following tools:
• Phillips screwdriver (diameter 7mm, length 120mm)
• Scissors or knife (used to cut the packing bands)
2.2 Installation Location
When selecting the installation location, avoid the following factors:
• Direct sunlight.
• Extremely high temperature.
• Extremely low temperature.
• Extremely high humidity.
• Environment with bad heat radiation.
• Areas where sudden temperature changes may occur, such as near a refrigerator, etc.
• Water splashes or chemical contamination.
• Areas where dust, iron powder, poison gases, etc. may arise.
• Areas subject to heavy vibration.
• Areas where products with strong magnetic parts are around.
(Near radios, TV sets, other electric appliances, etc.)
Provide space as shown in Figure 3-2-1 for placing the facsimile unit, considering the opera-
tion, daily maintenance, replacement of consumables, etc. Also be certain to keep the back
side of the machine at least 100 mm (4") away from the wall.
DP120F/DP125F Installation
558 mm
(22 inches)
Height: 628 mm (24.7 inches)
(Top Cover open)
Fig.3-2-1
3-2
100 mm
(3.9 inches)
March 2000 © TOSHIBA TEC
3-2-01
- Quick Links:
- Front View
Hide quick links:
Advertisement
Chapters
Table of Contents
