Connecting a JENEsys AHU Controller
The JENEsys AHU controller is a pre-programmed controller that determines which mode the AHU should operate based on outdoor air
temperature and outdoor air humidity sensors.
The outdoor air temperature, outdoor air humidity, and discharge air sensors are shipped loose inside the control cabinet and must be field
mounted in the intake and discharge ductwork.
Figure 15: Connecting a JENEsys AHU Controller
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG Life's Good" is a registered trademark of LG Corp.
Connection point for Cat. 5 cable
connection to AHU controller for
connection to computer.
Due to our policy of continuous product innovation, some specifications may change without notification.
Connecting a JENEsys AHU Controller
START-UP
27