7.3.4.3
Removing a 3.5-inch HDD module
Ê Remove the HDD module to be replaced from the server as described in
section
"Removing a 3.5-inch HDD module" on page
7.3.4.4
Installing a 3.5-inch HDD module
Ê Install the new HDD module into the empty drive bay as described in section
"Installing 3.5-inch HDD modules" on page
7.3.4.5
Concluding steps
Perform the following procedures:
"Performing a RAID array rebuild" on page 78
Ê
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
116.
112.
119