7.3.3.4
Installing a 3.5-inch HDD tray
V
CAUTION!
If the removed HDD module is not replaced immediately, always replace
the HDD tray into the unused HDD bay to comply with applicable EMC
regulations and satisfy cooling requirements.
Figure 74: Installing a 3.5-inch HDD tray
Ê Insert the HDD tray into the drive bay and carefully push back as far as it will
go (1).
Ê Close the release lever in the direction of the arrow (2).
CX400 S1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
117