GE MDS SD Series Reference Manual page 133

Secure, long range ip/ethernet & serial
Hide thumbs Also See for MDS SD Series:
Table of Contents

Advertisement

CONFIG
DEVINFO
DEVSET
MDS 05-4846A01, Rev. C
In
mode (the default setting), CTS will go high following RTS, sub-
DCE
ject to the CTS programmable delay time. If the
set to
, keying can be stimulated by the input of characters at the data
ON
port. Hardware flow control is implemented by signaling the CTS line if
data arrives faster than it can be buffered and transmitted.
Saves or displays the current configuration. The output is in a format
that may be copied back into the command line in order to set
the configuration. Optional arguments as follows:
—Restore factory configuration defaults.
INIT
—Save user configuration.
SAVE
—Restore user configuration.
RESTORE
—Displays all current settings.
SHOW
—Load user configuration via console.
LOAD
—Export user configuration via TFTP.
EXPORT
—Load user configuration via TFTP.
IMPORT
—TFTP server IP address.
HOSTIP=<IP address>
—Configuration file path.
FILE=<string>
TIMEOUT=<unsigned 8 bits>
Displays device information. Optional arguments as follows:
SER=<unsigned 32 bits>
—(read only) Displays software configuration data on
MODEL1=<string>
how the radio was configured when shipped from the factory.
—shows an identifier string associated with the
MODEL2 =<string>2
radio's hardware bill of materials and revision.
—(read only) Current package version.
SREV=<string>
—(read only) Current package build date.
BUILD=<string>
=<string> (read only)—Ethernet MAC address
MAC
Used to display/configure Device Settings
Optional arguments:
—Owner Name string
Owner=<string>
—Owner Message string
Message=<string>
—Sleep Mode control
SLEEP=<choices>
SD Series Ref. Manual (Packet & Transparent Mode)
—TFTP Timeout.
—Device serial number.
command is
DATAKEY
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents