LLDP Configuration
Use this page to change LLDP parameters.
Figure 94: LLDP Configuration
This page includes the following fields:
OBJECT
LLDP Status
LLDP hello time
LLDP hold time
PerPort Configuration
This page allows the user to inspect and configure the current LLDP port settings. The
LLDP Configuration screen in Figure 95 appears.
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
DESCRIPTION
Enable/Disable LLDP.
You can change LLDP hello time value. The time interval between the
transmission LLDP info packets. Value range is from 5 to 32768. Default
value is 30.
You can change LLDP hold time value. (The hold time * the hello time) is
the TTL time in the LLDP info packets. Value range is from 2 to 10. Default
value is 4.
Chapter 4: Web-Based Management
137