Table of Contents
Advertisement
1 CHANS Push-Button (Default)
Allows faders to be switched to control the level sent to the Main Output
busses.
2 M/T SEND Push-Button
Allows faders to be switched to control the level sent to the Multitrack
Busses during recording.
3 Channel Page Push-Button
Allows selection of Channel Fader Pages 1-24, 25-48 and so on.
4 INPUT GAIN Push-Button
Allows faders to be switched to control Mic, M/T Return and Line input
gain, according to the input source currently selected.
5 GROUP TRIM Push-Button
Allows faders to be switched to control the gain of the M/T bus output to
the track on the M/T recorder.
6 M/T MON Push-Button
Allows faders to be switched to control the level sent to the independent
M/T monitor bus, for a live mix situation when a multitrack is being
recorded in parallel.
7 SENDS 1-24 Push-Buttons
Allow faders to be switched to control the levels sent to effects and
foldback busses.
8 SUPER SGs 1-16 Push-Buttons (SUPER SEND GROUPS)
Act as a 'shift' function for the buttons SENDS 1-16 which allow the
faders to be switched to control the levels sent to the SUPER SG busses.
(Not operational in this version)
9 SEL Section SENDS 1-8, 9-16, 17-24 Push-Buttons
Allow the assignment of Send Bus Master Output Levels to be controlled
by central multi-purpose master faders.
!º SEL Section SUPER SGs 1-8, 9-16 Push-Buttons
Allow the assignment of SUPER SEND GROUP Output Levels to be
controlled by central multi-purpose master faders.
!¡ SEL Section GROUPs 1-8, 9-16, 17-24, 25-32 Push-Buttons
Allow Control Groups (equivalent to analogue VCA Groups) to be
assigned to central multi-purpose master faders. These Control Groups
may be nested.
!™ SUB LEVEL Push-Button
When the MT or Main Output Busses are set up for multi-channel
surround sound, this button allows the levels sent to the SUB bass channel
to be trimmed using the faders.
6-11
Chapter 6 Technical Descriptions
Advertisement
Table of Contents
