Static Route Configuration
Use Static Routing to specify a route used for data traffic within your LAN. This can be used to specify that all
packets destined for a particular subnet use a predetermined gateway.
Up to 18 static route configurations can be entered into the table. To eliminate an existing static route
configuration, click the Delete button for that configuration.
The information listed for the static route configuration is as follows:
IP Address
Subnet Mask
Gateway
Interface
Metric
State
Name
To modify an existing route configuration, click on the blue number hyperlink for the route. To define a new
route, click on an unused static route configuration number to see the configuration menu.
DSL-502G ADSL Router User's Guide
Figure 22. Static Route Configuration Table
IP address of the subnet or device where packets are routed.
Subnet mask that allows packets to be routed as intended.
IP address of the gateway used for this static route.
LAN interface.
Maximum number of hops allowed for the static route.
Route is enabled or disabled.
Name of the subnet or static route used.
41