Table of Contents
Advertisement
DSL-502G ADSL Router User's Guide
Hub or Switch to Router Connection
Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable. If you
wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports
(1x, 2x, etc.) with a crossed cable.
To
Power
Source
USB
Cable
Ethernet
Cable
ADSL Line
Figure 4. Router with USB and Ethernet to PC Connection
USB Connections
The DSL-502G can connect to one computer through the USB interface. This connection provides
access to the Internet through the ADSL connections as well as to other computers on the LAN
through the Ethernet port. In order to use the USB port two drivers must be installed on any system
that will be using it. See the next chapter for instructions on how to install the USB drivers.
Power On Router
To power on the device:
1. Insert the AC Power Adapter cord into the power receptacle located on the right side panel of the Router and
plug the adapter into a nearby power source.
2. You should see the Power LED indicator light up and remain lit.
7
Advertisement
Table of Contents
