DELAY+REV
One input, two output delay and reverb effects in parallel.
Parameter
DELAY L
0.0–1000.0 ms
DELAY R
0.0–1000.0 ms
FB. DLY
0.0–1000.0 ms
FB. GAIN
–99 to +99%
DELAY HI
0.1–1.0
HPF
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
DLY.BAL
0–100%
REV TIME
0.3–99.0 s
INI. DLY
0.0–500.0 ms
REV HI
0.1–1.0
DIFF.
0–10
DENSITY
0–100%
SYNC
OFF, ON
1
NOTE L
NOTE R
1
NOTE FB
1
1.
setting)
DELAY->REV
One input, two output delay and reverb effects in series.
Parameter
DELAY L
0.0–1000.0 ms
DELAY R
0.0–1000.0 ms
FB. DLY
0.0–1000.0 ms
FB. GAIN
–99 to +99%
DELAY HI
0.1–1.0
HPF
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
DLY.BAL
0–100%
REV TIME
0.3–99.0 s
INI. DLY
0.0–500.0 ms
REV HI
0.1–1.0
DIFF.
0–10
DENSITY
0–100%
SYNC
OFF, ON
1
NOTE L
NOTE R
*1
NOTE FB
*1
1.
setting)
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
Delay high-frequency feedback ratio
Delay and reverb balance (0% = all delay, 100% = all reverb)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
DELAY L
Used in conjunction with TEMPO to determine right channel
DELAY R
Used in conjunction with TEMPO to determine FB. DLY
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
Delay high-frequency feedback ratio
Delay and delayed reverb balance (0% = all delayed reverb,
100% = all delay)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine left channel
DELAY L
Used in conjunction with TEMPO to determine right channel
DELAY R
Used in conjunction with TEMPO to determine FB. DLY
Effects Parameters
Description
(Maximum value depends on the tempo
Description
(Maximum value depends on the tempo
DM1000—Owner's Manual
307