144
Chapter 12—Grouping Channels & Linking Parameters
7 To use a mute group, press one of the [ON] buttons for the grouped chan-
nels.
All channels in the group switch their on/off status.
Note:
• While a mute group is enabled, you cannot turn a subset of the grouped channels on or off.
• If you wish to turn a subset of the grouped channels on or off, first turn off the Enable button,
or remove the channels you wish to turn on or off from the group.
Linking EQ and Compressor Parameters
Follow the steps below to link EQ or compressor parameters for Input Channels or Output
Channels (Bus Outs 1–8, Aux Outs 1–8). This function enables you to set EQ or compressor
parameters for multiple channels to the same values simultaneously.
1 Press the DISPLAY ACCESS [PAIR/GROUP] button repeatedly until one of the
following pages appears.
- In EQ page
This page enables you to set EQ links (a–d) for Input Channels.
- Out EQ page
This page enables you to set EQ links (e–h) for Bus Outs (1–8) and Aux Outs (1–8).
DM1000—Owner's Manual