Startup - Huawei NetCol8000-E220 User Manual
Modular indirect evaporative cooling system
Hide thumbs
Also See for NetCol8000-E220:
- User manual (214 pages) ,
- Quick manual (23 pages) ,
- User manual (285 pages)
Table of Contents
Advertisement
NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Figure 5-10 WIFI Setting
Step 2 Set parameters.
Parameter
WiFi SSID
WiFi password
Enable WiFi
WiFi group sharing
enable
Step 3 Tap Submit.
----End
5.6 Startup
Context
On the main screen of the display module, there are Start and Shutdown buttons
for controlling the startup and shutdown of the units.
●
●
●
Issue 10 (2024-01-30)
If the unit is powered on again after a power failure, the unit automatically
restores to the original startup/shutdown state before the power failure.
Hardware ports are reserved on the display module to control the status of
remote dry contacts or remote startup and shutdown signals. The status of
remote dry contacts and remote startup and shutdown signals is started by
default.
Starting a unit over the screen or NMS is valid only when the status of remote
dry contacts or remote start/shutdown signal is started.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Set WiFi SSID based on the actual configuration; WiFi
SSID is the name used for the WiFi hotspot over which
a mobile phone can connect to the smart cooling
product.
Enter the WiFi password when you use a mobile phone
to connect to the WiFi. The WiFi has no preset
password. When you enable the WiFi function for the
first time, you need to set a password.
Enables the WiFi function of the smart cooling product.
The default status is Disable.
When a mobile phone is connected to the WiFi of the
smart cooling product, it can access the units in the
same FE cascading network.
5 Power-On and Commissioning
111
Advertisement
Table of Contents
