Table of Contents
Advertisement
The image above is an example; the appearance of your HIC may differ.
4. Hand-tighten the HIC thumbscrew.
Do not use a screwdriver, or you might over tighten the screws.
5. Using a #1 Phillips screwdriver, attach the HIC faceplate you removed from the original HIC
with the three screws.
7.3.5. Step 5: Reinstall controller canister
After replacing the HIC, reinstall the controller canister into the controller shelf.
Steps
1. Lower the cover on the controller canister and secure the thumbscrew.
2. While squeezing the controller handles, gently slide the controller canister all the way into the
controller shelf.
The controller audibly clicks when correctly installed into the shelf.
3. Install the SFPs into the new HIC and reconnect all the cables.
If you are using more than one host protocol, be sure to install the SFPs in the correct host
ports.
73
Advertisement
Table of Contents
