Table of Contents
Advertisement
The controller audibly clicks when correctly installed into the shelf.
3. Install the SFPs from the original controller in the host ports on the new controller, if they were
installed in the original controller, and reconnect all the cables.
If you are using more than one host protocol, be sure to install the SFPs in the correct host
ports.
4. If the original controller used DHCP for the IP address, locate the MAC address on the label on
the back of the replacement controller. Ask your network administrator to associate the
DNS/network and IP address for the controller you removed with the MAC address for the
replacement controller.
If the original controller did not use DHCP for the IP address, the new
controller adopts the IP address of the controller you removed.
3.2.4. Step 4: Complete controller replacement
Place the controller online, collect support data, and resume operations.
Steps
1. Place controller online.
a. In System Manager, navigate to the Hardware page.
b. Select Show back of controller.
c. Select the replaced controller.
d. Select Place online from the drop-down list.
30
Advertisement
Table of Contents
