Table of Contents
Advertisement
3. If removed, install the SFPs into the new HIC and reconnect all the cables. If you are using more
than one host protocol, be sure to install the SFPs in the correct host ports.
If you are using more than one host protocol, be sure to install the SFPs in the correct host
ports.
7.2.6. Step 6: Complete the HIC upgrade
Place the controller online, collect support data, and resume operations.
Steps
1. Place controller online.
a. Plug in power cables.
2. As the controller boots, check the controller LEDs.
◦ The amber Attention LED remains on.
◦ The Host Link LEDs might be on, blinking, or off, depending on the host interface.
3. When the controller is back online, confirm that its status is Optimal and check the controller
shelf's Attention LEDs.
If the status is not Optimal or if any of the Attention LEDs are on, confirm that all cables are
correctly seated and the controller canister is installed correctly. If necessary, remove and
reinstall the controller canister.
If you cannot resolve the problem, contact technical support.
4. Click Hardware › Support › Upgrade Center to ensure that the latest version of ThinkSystem
65
Advertisement
Table of Contents
