Bosch BE 634G 1T Series User Manual And Installation Instructions page 19

Table of Contents

Advertisement

Available languages

Available languages

Fault
The control ring is dif-
ficult to turn.
The interior lighting is
not working.
15.2 Information on display panel
Fault
The display shows
the error message
"Exxx"
16  Disposal
16.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
17  Customer Service
Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.
Cause and troubleshooting
There is dirt under the control ring.
The control ring can be removed.
Note: Do not remove the control ring too often, or the support may become unstable.
1.
To remove the control ring, press down on the outer edge of the control ring.
a The control ring will tilt, making it easier to grasp.
2.
Remove the control ring from its support.
3.
Carefully clean the control ring and its support on the appliance using a cloth and soapy
water.
Do not use harsh or abrasive cleaning products.
Do not soak the control ring.
Do not clean the control ring in the dishwasher.
4.
Dry the control ring with a soft cloth.
Interior lighting is defective
Call
→ "Customer Service", Page 19.
Cause and troubleshooting
An error has occurred.
1.
If the display shows an error message, switch the appliance off and on again.
a If the display no longer shows the error message, it was a one-off problem.
2.
If the display continues to show or repeatedly shows the error message, contact cus-
tomer service and provide them with the error code.
3.
If the display shows error message E0532, open and close the appliance door.
4.
If the display shows error message E6501, switch the appliance off and then switch it
back on again after 10 minutes.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
This product contains light sources from energy effi-
ciency class E. These light sources are available as a
spare part and should only be replaced by trained spe-
cialist staff.
Disposal en
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

8 seriesBel634gs1t

Table of Contents