Table of Contents
Advertisement
Listening with the Same DSP File
M ode
E very
Ti MeE
-~ 15m (Last Sound Memory) Function
(wl
ells
eer
er)
airs Preset number button 2)
PONE
Secon
e hs est E Re ae
What is the LSM (last sound memory) function?
This function memorizes the selected DSP file of each program
source at all times. With this function, you can always listen to the
same program source with the same DSP file even after changing
the program source or turning the unit on afresh.
Playing with the LSM Function
Press and hold the MODE
button and then press the
preset number button 2. _
+a
LSM ON
|
If you wish to cancel the LSM function, press and hold the MODE
button and then press the preset number button 2 again.
24
NISSAN
Screws supplied
to master unit
XOP-766EQ
Master unit XR-C720 etc.
Screws supplied to
genuine bracket
Use the existing parts supplied to your car except for @.
For example, you have listened
to the sources in the following
order; a disc in " $2" mode then
a tape in "U3" mode and then the
radio in "U2" mode. Uf you then
listen to a disc again, the DSP file
number changes to "S2"
automatically. If you then listen
to a tape after that, the DSP file
number changes to "U3".
Notes
* While the LSM function is
activated, if you play discs,in
the DSP custom file mode (page
22), the discs will be played in
the respective user's DSP files
automatically,
¢ The LSM button on the master
unit does not function even if it
is equipped with one. Use the
buttons on this unit to operate
the LSM function.
Screws supplied
to master unit
Installation |
Precautions
* Choose the mounting location carefully so that the unit will not interfere with the normal driving functions
of the driver.
* Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or
hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
* Use only the supplied mounting hardware for a safe and secure installation.
Mounting angle adjustment
¢ Adjust the mounting angle to less than 20°.
¢ When the installation and connections are over, make sure that all the electric devices such as, tail lamps,
turning signals, horn, and wipers etc. function properly.
Mounting the Unit in a Japanese Car
You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your nearest
Sony dealer.
TOYOTA
Screws supplied
to master unit
XDP-766EQ
Master unit XR-C720 etc.
genuine bracket
Screws supplied
to master unit
Note
'
When you are mounting the unit on to the genuine bracket, use the supplied flat-tipped screws ®
while observing the screw holes marked T (for Toyota) or N (for Nissan) on either side of the unit.
If you are going to use other screws other than the supplied ones, be sure to use the following
screws:
|
Smm
Flat-tipped screw
Max. dimension
KS x 10mm
Alternative type screw
Max. dimension
M5 x 8mm
Do not use longer screws as doing so can cause a malfunction of the unit.
Advertisement
Table of Contents
