Advertisement
a How To Use the Sleep Feature
® Unattended recording
'T) Tune in the desired station.
@ Morning alarm playback
@) Place the recorder in the Play mode.
@ Set the audio timer so that the recorder is powered on when
the desired time is reached.
Connect the power cord of the
recorder to the audio timer (power remains off}.
@) Press the [1 ON button and then om OFF/SLEEP button of
the [POWER]
switch.
@) Place the
[TIMER/MQJS]
button @
in the
(1 MQJS/
TIMER
ON position.
Place the [TIMER]
button & in the (1 PB position.
Tape playback will automatically
be started when the preset
time is reached.
®
®
CAUTIONS
2. When
the end of the tape is reached at the end of auto-
matic recording
or playback,
the tape will automatically
stop.
@ Morning alarm by radio
G@) Tune in the desired station.
procedure.
time is reached.
Cassette Tape Used
Normal:
C-30, C-60,C-90, C-120
Chrome:
C-45,C-60,C-90
Metal:
-46,C60, C-90
Tape Speed
48 cm/sec.
Track Systam
Four-track
two-channel stereophonic
Recording System
Erasing System
Frequency Rasponsa
AC bias (85 kHz)
AC erasing
Normal:
50 Hz to 12kHz
Metal:
50 Hz to 15k Hz
Receiving Frequency
FM:
88 MHz to 108 MHz
SW2:
7.5 MHz to 22 MHz
SW1:
2.3 MHz to 7.5 MHz
»
MW:
525 kHz to 1605 kHz
Intermediate Frequency
FM:
10.7 MHz
MW, SW:
455 kHz
Antenna
FM,SW:
telescopic antennas
MW:
ferrite-core antenna
Speakers
Woofer (180 mm dia. dynamic) x 2
Tweeter (40 mm dia. dynamic} x 2
Power Supply
Jacks
(MiC]
jack x 2, Impedance
200 ohm
to 2k
ohm,
3.5 mm
{MIXING MIC] jack x 1, impedance 200 ohm
to 2k ohm, 66.3 mm
[AUX/PHONO]
jack
x 2, !mpedance
20k
ohm, pin-type
[LINE QUT]
jack x 2, !moedance 4.7 k ahm,
pin-type
{SPEAKER}
jack x 2, Impedance 3.2 ohm to
8 ohm, 63.5 mm
{PHONES}
jack headahone, 96.3 mm
AC 110 to 127 V, 220 to 240 V, 50/60 Hz
DC 13.5 V (SUM-1 "'D" size x 9)
Power Consumption
25W
Dimensions
Weight
520 (W) x 307 (H) x 172 (BD) mm
6.5 kg (without batteries)
Specifications are subject to change for improvement.
Advertisement
