Figure 38. Installing the power button - Grounding tape adhered to keyboard plate
Next steps
1. Install the
I/O
board.
2. Install the
base
cover.
3. Follow the procedure in
Power-adapter port
Removing the power-adapter port
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
77