Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.
Figure 15. Installing the wireless card
Steps
1. Connect the wireless-antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 28. Antenna-cable color scheme
Connectors on the
wireless card
Main
46
Removing and installing Customer Replaceable Units (CRUs)
Antenna-cable color
White
Silkscreen marking
MAIN
△ (white triangle)