Sony BDV-HZ970W Operating Instructions Manual page 71
Blu-ray disc/dvd home theatre system
Hide thumbs
Also See for BDV-HZ970W:
- Operating instructions manual (88 pages) ,
- Quick setup manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Symptom
There is no sound from the
stlrrotlnd
speakers
or
s1jrround
back speakers.
Problems
and solutions
Check Ihe slatus of the S-AIR/STANDBY
indicator
on the surround
amplifier.
• Turns off.
Check Ihat the AC power cord (mains lead) ol' the surround
amplifier
is
connected
securely.
Turn lhe surround
amplifier
on by pressing
I/Q,) on the surround
amplifier.
• Flashes orange.
Check 1hat the wireless
transceiver
is inserted
into the surround
amplil'ier
correctly
(page 27).
• Flashes green quickly.
Set 1he SURROUND
SELECTOR
swilch of the surround
amplifier
to
S[JRROUND
(page 29).
lflhere
is no sound from 1he surround
back speakers,
set [Surround Back] in
[Speaker Settings
lo [Yes] (page 54).
• Flashes red.
Press I/Q,) to turn off the surround
amplifier,
and check the following
items.
@Are
the + and
speaker
cords shorl-circuited?
@Is anything
blocking
the ventilation
holes ol' the surround
amplifier?
After checking
the above items and fixing any problems,
turn on the
surround
amplifier.
If lhe cause of lhe problem
cannot be found even after
checking
all 1he above items, consul1 your nearest Sony dealer.
• Flashes green slowly or turns red.
Confirm
lhe S-AIR
IDs of Ihe unil and S-AIR sub unit (page 46).
Confirm
1he pairing
setling (page 48).
See "If wireless
transmission
is unstable"
(page 49).
Sound transmission
is poor. Move the surround
amplifier
so that the S-AIR/
STANDBY
indicator
turns green.
Move the syslem
away from other wireless
devices.
AvoM using any other wireless
devices.
• Turns green.
The speaker cord is no1 connecled
securely.
Check lhe speaker
connections
and seltings.
Depending
on l he source or lhe settings ol' the S-AIR main unit, the effect of
the speakers
may be less noticeable.
Operation
Symptom
Radio stations cannot be tuned
in.
The disc does not play.
Problems
and solutions
• Check that the antenna
(aerial) is connected
securely.
Adjust the antenna
(aerial) or connect
an external
antenna
(aerial) if necessary.
• The signal strength
of the stations
is too weak (when tuning in with automatic
tuning).
Use direct tuning.
• You are attempting
to play a disc with a format that cannot be played back by
this system
(page 75).
• The region code on the BD/DVD
does not match the system.
• Moisture
has condensed
inside the unit and may cause damage
to the lenses.
Remove the disc and leave the unit turned on for about hall' an hour.
• The system cannot play a recorded
disc that is not correctly
finalized
(page 75).
u,
o
-I
o
o
71 us
Advertisement
Table of Contents
