Sony BDV-HZ970W Operating Instructions Manual page 70
Blu-ray disc/dvd home theatre system
Hide thumbs
Also See for BDV-HZ970W:
- Operating instructions manual (88 pages) ,
- Quick setup manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Symptom
There
is no sound
from
the
subwoofer.
There
is no digital
sound
from
the HDMI
(OUT)
jack
when
using
the Audio
Return
Channel
function.
The system does not output
sound correctly
when connected
to a set-top box.
Severe
hum or noise is heard.
The sound loses stere() effect
when you play a CD.
The surround
effect is difficult to
hear when you are playing
a
sound track ol' Dolby Digital,
DTS, or MPEG
audit).
The sound comes from the center
speaker
only.
No sound is heard from the
center
speaker.
No sound or only a very low-
level sound is heard from the
surround
speakers.
The beginning
of the sound is cut
off.
The sound effects are disabled.
Distortion
occurs
in the sound ol'
a connected
component.
Problems
and solutions
• Check the speaker connections
and settings
(pages 21,53).
• Set [Control for HDMI]
in IHDMI Settings]
of' ISystem Settings]
to IOn]
(page 63). Also, set [Audio Return
Channel]
in [HDMI Settings]
of [System
Settings]
to [Auto] (page 63).
• Make sure that your TV is compatible
with the Audio Return Channel
function.
• Make sure that an HDMI cable is connected
to a jack on your TV that is
compatible
with the Audio Return Channel
function.
• The sampling
frequency
of' the input stream is more than 48 kHz.
• Set [Audit) Return
Channel]
in [HDMI Settings]
of [System
Settings]
to [Off]
(page 52).
• Check that the connecting
cords are away from a transl'omler
or motor, and at
least 10 feet (3 meters) away from your TV set or a fluorescent
light.
• Move your TV away from the audio components.
• Clean the disc.
• Select stereo sound by pressing
AUDIO
(page 41 ).
• Check the surround
setting (page 33).
• Check the speaker connections
and settings
(pages 21,53).
• Depending
on the BD/DVD,
the output signal may not be the entire 5.1 channeh
It may be monaural
or stereo even if the sound track is recorded
in Dolby
Digital or MPEG audit) format.
• Depending
on the disc, the sound may come from the center speaker
only.
• Check the speaker connections
and settings
(pages 21,53).
• Check the surround
setting (page 33).
• Depending
on the source, the effect of the center
speaker may be less
noticeable.
• A 2 channel
source
is being played.
• Check the speaker connections
and settings
(pages 21,53).
• Check the surround
setting (page 33).
• Depending
on the source, the effect of the surround
speakers
may be less
noticeable.
• Check the wireless
setting (page 29).
• A 2 channel
source
is being played.
• Set the sound mode to "MOVIE"
or "MUSIC"
(page 41 ).
• Select "A.ED.
STD" for "SUR.SETTING"
(page 33).
• The effects of SOUND
MODE,
"TONE,"
"NIGHT
MODE,"
and
"SUR.SETTING"
may be disabled
depending
on the input stream (page 61 ).
• Reduce the input level for the connected
component
by setting IAttenuate -
AUDIO]
(page 61 ).
70u_
Advertisement
Table of Contents
