Sony BDV-HZ970W Operating Instructions Manual page 69
Blu-ray disc/dvd home theatre system
Hide thumbs
Also See for BDV-HZ970W:
- Operating instructions manual (88 pages) ,
- Quick setup manual (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Symptom
No picture
appears
when the
vide() output
resolution
selected
in [Output
Vide() Format]
is
incorrect.
Vide() signals
am only output
from the HDMI (OUT)jack
when connecting
the HDMI
(OUT) jack and other video
output jacks at the same time.
Problems
and solutions
• Press and hold _
and VOLUME-
on the unit for more than 5 seconds to reset
the video output resolution
to the lowest resolution.
• Set [Outl)Ut VMeo Format]
in [Screen
Settings]
to [Component
Vide()]
(page 60).
The clark areaofthe
piclure is too
• Set [Picture Quality
Mode] to [Standard]
(default)
(page 38).
dark/the
bright area is too bright
or unnaturah
The picture
is not output
• Check the [Oulput
Video Format]
settings
in [Screen Settings]
(page 60).
correctly.
• If the analog and digital signals
are output at the same time, set [BD/DVD-
ROM 1080124p Output]
in [Screen Settings]
Io [Off] (page 60).
• For BD-ROMs,
check the [BD/DVD-ROM
1080124p Output]
settings
in
[Screen Settings]
(page 60).
Picture noise appears.
• The disc is dirty or l'lawed.
• If the piclure
output l'rom your system
goes through
your VCR to get to your
TV, the COl)y-protection
signal applied to some BD/DVD
programs
could affect
picture quality.
If you still experience
problems
even when you connect
your
unit directly
to your TV, try connecting
your unit to the other input jacks.
• The aspect ratio on the disc is fixed.
Even though
you set the aspect
ratio in [TV Type] of' [Screen
Settings],
the picture does not fill
the TV screen.
Color irregularity
occurs
on the
TV screen.
• If the speakers
are used with a CRT-based
TV or projector,
install the speakers
at least 1.0 ft (0.3 meters) from the TV set.
• If the color irregularity
persists,
turn ofl' the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic
object
(magnetic
latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Sound
Symptom
There is no sound.
Problems
and solutions
• The speaker
cord is not connected
securely.
• Check the speaker
settings
(page 53).
• Fast lbrward
or fast reverse
is performed.
Press _
to return to normal play
mode.
• Slow forward or freeze frame is performed.
Press _
to return to normal play
mode.
• Set [Audio Output]
to [Speaker]
(page 61).
No sound is output from the
• Set [Audio Output]
to [HDMI]
(page 61 ).
HDMI OUT jack.
The Super Audio CD sound of a
• HDMI (IN 1) and HDMI
(IN 2) does not accept an audio format that contains
component
that is connected
to
copy protection.
Connect
the analog audio output of the component
to the
the HDMI (IN 1) or HDMI (IN
AUDIO
(AUDIO
IN L/R) jacks of the unit.
2) jack is not output.
The left and right sounds
are
• Check that the speakers
and components
are connected
correctly
and securely.
unbalanced
or reversed.
u.
o
-.I
....,
o
&
o
69us
Advertisement
Table of Contents
