Table of Contents
Advertisement
2
Attach the DC-L90 to the top
panel of this unit.
Use the same method that you use
to attach the BP-L60(A)/L90(A).
For details, refer to "To attach
the battery pack" on page 2-1.
To connect to the DC IN
connector
Use the DC-210 Battery Adaptor.
For more information about
connections, refer to the operating
instructions of the DC-210.
You can also connect another battery
pack to the DC IN connector when a
BP-90(A) battery pack is already
mounted on the top panel of this unit.
When you connect an external battery
pack to the DC IN connector, the
power supply automatically switches
to the external battery pack from an
internal battery pack mounted on the
top panel of the unit.
Notes
• Noise may occur in video and audio
signals at the moment when the unit
switches from the internal to the
external battery.
• It is always the external batteries
connected to the DC IN connectors
that serve as power supply. You
cannot switch the power supply from
the external batteries to the internal
batteries while the external batteries
are connected to the DC IN
connector.
When an external battery pack is
almost exhausted
If an internal battery pack is already
mounted, disconnect the external
battery pack by pulling its DC power
cord out from the DC IN connector. If
no internal battery back is mounted,
disconnect the external battery pack
after mounting a fully charged internal
battery pack.
When an internal battery pack is
almost exhausted
Connect a fully charged external
battery pack to the DC IN connector,
then exchange the internal battery
pack.
2-1-4 Using AC Power
You can operate the unit from an AC
power source by using the AC-550/
550CE AC Adaptor or AC-DN2(A)
AC Adaptor. Use the AC-550/550CE
to connect the AC power source to the
DC IN connector, and the AC-
DN2(A) to connect the AC power
source to the battery connector.
To use the AC-550/550CE
As shown in the figure, connect the
AC-550/550CE to the AC power
source and turn it on.
When you connect AC power, the
power supply automatically switches
to the AC power from a battery pack
mounted on the top panel of the unit.
Note
Noise may occur in video and audio
signals at the moment when the unit
switches from the battery pack to AC
power.
2-3
Preparations
Advertisement
Table of Contents
