Table of Contents
Advertisement
Setting Edit Points
3-3-2 Checking Edit
Points
You can check the time data of edit
points and the duration between two
edit points by displaying them in the
sub LCD.
To display the time data of
edit points
Press the recorder side or player side
IN or OUT button.
IN button
OUT button
AUDIO IN
AUDIO IN
–
+
TRIM
GOOD
LIST
MARK
SHOT
DELETE
ENTRY SHIFT
DELETE
IN
OUT
IN button
While the button remains pressed, the
time data for the corresponding edit
point is displayed in the sub LCD.
3-6
Editing
To display the duration
between two edit points
From among the recorder and player
IN buttons (or AUDIO IN buttons)
and OUT buttons, press two of the
buttons together.
The duration appears in the sub LCD
while the buttons are kept pressed. In
some cases, negative durations
preceded by a minus sign (–) may be
displayed.
The displayed durations are calculated
as follows.
–
+
TRIM
GOOD
LIST
MARK
SHOT
ENTRY SHIFT
IN
OUT
You can cue up any edit point, or cue
OUT button
up a position located a specified
amount of time before the edit start
point (preroll).
To set the preroll time
Using the setup menu item 001,
specify how many seconds (the preroll
time) in advance of the edit start point
to set the preroll point.
The factory default preroll time is 5
seconds.
For details, see page 6-2.
When two edit points are set: The
duration between the two edit
points
When only one edit point is set:
The duration between the edit
point and the current tape
position
When no edit points are set: The
duration of the most recently set
edit points
3-3-3 Cueing Up Edit
Points
Advertisement
Table of Contents
