Table of Contents
Advertisement
3-1 Selecting an Edit Mode
You can do two types of editing on
this unit: assemble editing and insert
editing. This section provides an
outline of each type and explains how
to select an edit mode.
3-1-1 Assemble Editing
In assemble editing, you record video
and audio materials in order from the
start of the tape. In addition to video,
audio, CTL and timecode are
recorded. If timecode is already
recorded on the tape, the new
timecode is recorded so as to form a
continuous sequence with the existing
timecode.
Assemble editing is convenient when
you are recording on a new tape.
Note
Before you begin assemble editing for
the first time with a new tape, video
signal such as black signal, CTL and
timecode must be recorded on the tape
in advance of the recorder IN point for
a length equal to or greater than the
preroll time.
Selecting assemble mode
1
Press the RECORDER button on
the recorder control panel.
The RECORDER indicator lights.
2
Press the ASSEMBLE button on
the recorder control panel.
The ASSEMBLE indicator lights.
To cancel assemble mode
Press the ASSEMBLE button again to
turn the ASSEMBLE indicator off.
ASSEMBLE
VIDEO
CH-1
2
PLAYER
RECORDER
DMC
1
3-1
Editing
Advertisement
Table of Contents
