Siemens SICHARGE UC Operating Instructions Manual page 84
Hide thumbs
Also See for SICHARGE UC:
- Operating instructions manual (114 pages) ,
- Installation and commissioning manual (79 pages)
Table of Contents
Advertisement
Operation
8.7 Operating the Service menu
Deactivate alarm and start charging again
To restart the charging process after an alarm, proceed as follows:
1. Press the alarm button
2. Press the "Acknowledge alarm" button
The SICHARGE UC Dispenser deactivates the alarm. In the "Status" column, the status value
"(I)O" is displayed for the deactivated alarm. The SICHARGE UC Dispenser continues the
interrupted charging process.
NOTE
Alarm that cannot be deactivated
When the SICHARGE UC Dispenser does not deactivate the alarm after pressing the
"Acknowledge alarm" button, the cause of the alarm is still present.
• Continue to observe the safety instructions in the general section Safety instructions
(Page 9) and the safety instructions for the operation (Page 68).
• Then check again whether you can eliminate the cause of the alarm.
• If you cannot eliminate the cause of the alarm, contact technical support.
84
③
.
②
.
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
Advertisement
Table of Contents
