Connecting; Safety Instructions - Siemens SICHARGE UC Operating Instructions Manual
Hide thumbs
Also See for SICHARGE UC:
- Operating instructions manual (114 pages) ,
- Installation and commissioning manual (79 pages)
Table of Contents
Advertisement
Connecting
6.1
Safety instructions
The installer is responsible for the electrical connection of the SICHARGE UC Dispenser. The
electrical connection of the SICHARGE UC Dispenser must be done according to the relevant
regulations (such as conductor cross-section, fuses, ground connection).
When working on the SICHARGE UC Dispenser, observe the general Safety instructions (Page
9).
Take into account the requirements listed in DIN EN 50110‑1 for the secure operation of
electrical installations or other applicable local guidelines. Also observe the following safety
instructions.
Electric shock due to lack of grounding
If the protective conductor connection is missing or incorrectly connected, high voltages
may be present on exposed parts. Touching the parts can lead to serious injury or death. To
ground the SICHARGE UC Dispenser, connect the protective conductor properly.
Qualified personnel
Only qualified and trained persons may work on the SICHARGE UC Dispenser.
Only a qualified and trained electrician may work on the SICHARGE UC Dispenser.
Fall arrester
Use approved protective equipment to protect persons, components and tools against falling
starting at a working height of 1 m.
Falling parts
When working at an elevated height, watch out for falling parts, cables or plugs.
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE
WARNING
WARNING
WARNING
WARNING
6
53
Advertisement
Table of Contents
