Cleaning The Cabinet And The Charging Cable - Siemens SICHARGE UC Operating Instructions Manual

Table of Contents

Advertisement

Maintenance and service
10.3 Servicing the charging station
NOTE
Only clean the touch screen when it is switched off
If you clean the touch screen when it is switched on, you can trigger operator errors. This
may put the SICHARGE UC Dispenser unintentionally into an undesirable operating state.
• Switch off the touch screen of the SICHARGE UC Dispenser before you clean it.
Permitted cleaning agents and tools
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. Mild
detergents are, for example, dishwashing liquid.
• Use only soft cleaning cloths.
NOTE
Observe information on chemical resistance
To ensure a long service life, observe the following information regarding the chemical
resistance of SIMATIC HMI devices.
(https://support.industry.siemens.com/cs/ww/en/view/39718396)
Cleaning the touch screen
Clean the touch screen as follows:
1. Apply the cleaning agent on the cleaning cloth.
2. Start cleaning at the edge of the screen.
3. Wipe with the cleaning cloth from the edge of the screen to the inside.
10.3.2

Cleaning the cabinet and the charging cable

Electric shock due to water ingress
Water entering the SICHARGE UC Dispenser can damage the SICHARGE UC Dispenser. If the
unit is damaged, dangerous voltages may be present on the cabinet or exposed
components, which can cause serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a pressure washer or steam cleaner to clean the SICHARGE UC Dispenser.
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the exterior surfaces of the SICHARGE UC Dispenser.
Therefore, do not use any solvents. Also, never use aggressive or abrasive cleaning agents.
104
WARNING
WARNING
SICHARGE UC Dispenser
Operating Instructions, 06/2023, A5E50235695-AE

Advertisement

Table of Contents
loading

Table of Contents