Disable Number Of Present Indication; Alter Screen Line Length Of Synoptic; Headphone And Mastervolume Controls On Top - Bosch DCN Manual
Hide thumbs
Also See for DCN:
- Installation and user instructions manual (114 pages) ,
- Hardware installation manual (32 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
External Interface Manual
The following DCN.INI section determines this setting (30 channels used in this example):
[Interpretation]
Channels=30
where:
Channels
8.5
Disable Number of Present indication
Normally, the number of delegates present during a voting is determined by the number of delegates that
pressed the 'PRESENT' key on their units. When the LBB 3575 or LBB 3576 PC-software is used, this
number can also be determined by the number of authorised delegates in the delegate database (100%-votes
setting set to 'Authorised'), or the number of people that actually casted a vote (100%-votes setting set to
'Casted'). In these 2 cases, the 'Present'-legend on the LBB 3583 Text Display and the LBB 3584 Video
Display will switch to 'Authorised' or 'Casted'. However, on the unit LCD's and the LBB 3583 numeric
displays, this legend will not be changed. This might be experienced as confusing. To prevent confusion, the
display of the number of 'Authorised' or 'Casted' delegates on unit LCD's and LBB 3583 numeric displays can
be disabled.
The following DCN.INI section determines this setting (value show is the default):
[Startup]
DisablePresentNumber=No
where:
DisablePresentNumber
8.6
Alter Screen line length of Synoptic
Altering the default screen line length of Synoptic Microphone. When a screen line is displayed instead of a
microphone icon, two lines of maximum of 15 characters are displayed by default. It is possible to change the
number of characters displayed on each line to any number between 0 and 15. This would be useful if, for
example, it was necessary to save layout screen space. To alter the default setting you must edit the DCN.INI
file:
[Synoptic]
ScreenLineLength=#
where:
ScreenLineLength
8.7
HeadPhone and MasterVolume controls on top
Normally, the headphone and master volume controls are not always on top of the other windows. When
using maximized windows, these controls are not visible anymore. With this setting it is possible to have one
or both controls always on top. If these setting are not in DCN.INI, the default of not always on top will be
used.
The following DCN.INI section determines this setting:
[Startup]
HeadPhoneOnTop=No
MasterVolOnTop=No
where:
HeadPhoneOnTop
MasterVolOnTop
Bosch Security Systems B.V. | 2004 April | External Interface Manual
Number of Simultaneous Interpretation Channels. Maximum
number of channels is 30.
When set to 'Yes', the display of number of Authorised
Delegates or Casted Votes will be disabled.
length between 0 and 15
When set to 'Yes', the headphone control will always be on
top.
When set to 'Yes', the master volume control will always be
on top.
en | 35
Advertisement
Table of Contents
