Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Internal tone/voice call (Extension)
0#: Call extension using internal ringing tone
1#: Call extension by voice
2#: Disable choice (always tone call)
When an extension is calling another extension, the call can be invoked by voice, internal ringing
tone, or set to tone call only by disabling the choices.
Note:
When using the Voice Announce Unit this step must be set to default (0#) for correct VAU
operation.
Alert tone in voice call
0#: Alert tone does not sound for voice call
1#: Alert tone sounds for voice call
When using voice call mode, an alert tone (Splash tone ) can be sounded first for 0.5 seconds
from the called extension. Only applicable on voice calls.
Alert tone on conference call [Not Used]
0#: Alert tone not sent out for conference
1#: Alert tone sent out for conference
When beginning a conference call, an alert tone may be sent.
Alert tone during conference call
0#: Alert tone not sent out during conference
1#: Alert tone sent out during conference
When on a conference call, an alert tone may be sent every 5 seconds.
System Speed Dial (SSD) directory display-name
0#: Display 1 SSD name on 1 line
1#: Display 2 SSD names on 1 line
This specifies whether 1 SSD name or 2 SSD names appear on each line of the large display key
telephone.
Related Step FF3-17 ,PSD directory display -name",
FF1-2#-1#-14#-
[NOT USED]
FF1-2#-1#-9#-(0-2)#
FF1-2#-1#-10#-(0 or 1)#
FF1-2#-1#-11#-(0 or 1)#
FF1-2#-1#-12#-(0-1)#
FF1-2#-1#-13#-(0 or 1)#
(5 names for 1 display)
(10 names for 1 display)
16
Issue 15
[EXT CALL MODE]
[SPT ON V-CALL]
[NOT USED]
[CONFTONE ON/OFF]
[SSD DISP. MODE]
2.x
2.x
2.x
2.x
2.x
Advertisement
Table of Contents
