Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Registration of network carriers
(4-10)#
4#: Carrier 1
5#: Carrier 2
6#: Carrier 3
7#: Carrier 4
8#: Carrier 5
9#: Carrier 6
10#: Carrier 7
Each network carrier to be used must be enabled. The system can use up to 7 carriers in addition
to the directly connected lines. In default Carrier 1 is used and its defaults are those required for
Mercury, carriers 2 to 7 are not used and have no default values set.
Assignment of network operators to lines
FF10-(PASSWORD)#-2#-(01-48)#-(1-7)#-(0 or 1)#
(01-48)#
Line number
Network operators (carriers) are assigned to each line on which their service is available.
Storing access codes for each network operator
FF10-(PASSWORD)#-3#-1#-(1-8)#-(0-9999999999)#
(1-8)#
1#: Carrier 1
2#: Carrier 2
3#: Carrier 3
4#: Carrier 4
5#: Carrier 5
6#: Carrier 6
7#: Carrier 7
8#: Directly connected network
Each carrier the system uses can have an access code stored which is used to dial up the service
and for forcing calls via a particular carrier. In default carrier 1 is set for 131 , Mercury and the
direct network 8 for 121, BT. These can all be changed as required by programming.
FF10-(PASSWORD)#-1#-(4-10)#-(0 or 1)#
(1-7)#
Carrier number
(0-9999999999)#
Access code
maximum 10 digits
[0:NOT SET 1:SET]
(0-1)#
0#: Not Used
1#: Used
[0:NOT SET 1:SET]
(0-1)#
0#: Not assigned
1#: Assigned
MCL is assigned for every line in default
[ACCESS DIAL MODE]
123
Issue 15
2.x
2.x
2.x
Advertisement
Table of Contents
