Ptz Settings - Bosch AUTODOME 7100i User Manual
Hide thumbs
Also See for AUTODOME 7100i:
- Installation manual (52 pages) ,
- Installation manual (84 pages)
Table of Contents
Advertisement
36
en | Configuration
Zoom
Maximum zoom speed
Controls the zoom speed.
Zoom limit
Select the appropriate limit for zooming the camera: 20x, 30x, or 40x.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process.
Select On to enable this feature.
Select Off to disable this feature.
4.4.7
PTZ Settings
Auto pan speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees per second), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
–
–
Inactivity period
Determines the behavior of the camera when the control for the camera is inactive. Select a
time period from the pull-down list (3 s - 24 h). The default setting is 30 seconds.
Number of sectors
Select the appropriate number of sectors (for example, 4, 6, 8, 9, 12, or 16).
Note: The number that you select in this field determines the number of sectors that appear in
the Sectors page (below).
Auto pivot
The Auto pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image. Set the Auto Pivot to On (default) to
automatically rotate the camera 180º when following a subject traveling directly beneath the
camera. To disable this feature, click Off.
Freeze frame
Select On to freeze the image while the camera moves to a predetermined scene position.
Azimuth
Select On to display azimuth/elevation readings.
Select Off to hide azimuth/elevation readings.
Maximum pan speed [%]
Select the maximum pan speed (in percent).
Maximum tilt speed [%]
Select the maximum tilt speed (in percent).
Tracking zoom-out limit [%]
This parameter defines the zoom ratio percentage to which the camera zooms out after
Tracking idel time [s] stops tracking, or if Intelligent Tracking loses visibility of an object being
tracked. This allows the camera to re-acquire the target in a new, wider FoV.
2022-12 | V01 | DOC
Off (default): camera remains on a current scene indefinitely.
Pre-position 1: camera returns to Pre-position 1.
Previous AUX: camera returns to the previous AUX activity.
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.
- Quick Links:
- Browser Connection
- Network
Hide quick links:
Advertisement
Table of Contents
