Table of Contents
Advertisement
Available languages
Available languages
Use the
keys to obtain the
the garment sleeves for a better finishing.
This function is
available only when the finishing
cycle is running
SLEEVE TENSIONING
Use this function
for a manual adjustment of the sleeve
tensioning
Use the +/-
keys to obtain the correct tensioning of the
garment sleeves for a better finishing.
This function is
available only when the finishing
cycle is
running.
ALARM
When the PLC identifies a malfunction appears on the
screen this key
that remains until the resolution of
the problem, the alarm is also written in black in the
Alarm Log. Press the key to view the active alarms: for
each active alarms a window pops up with the specific
indication of the alarm number, the description, the
Input and the total number of the active alarms; press
on the key
to confirm the reading of single
alarm and close the window,
present in the Alarm Log changes its color in yellow
(see "Anomaly-PLC alarm")..
MENU SECONDARIO
From "Home" MENU press the key
"Secondary"
MENU
for:
Diagnostic, Alarms and Info.
to come back to "Home" MENU.
Press the key
correct alignment of
the alarm already
to enter the
Language,
Production,
LANGUAGE
This MENU allows you to set the language for touch-
screen.
From "Secondary" MENU press the word Language and
then choose the language required.
Come back to "secondary" MENU by pressing the key
or come back to "Home" MENU by press the key
.
PRODUCTION
Use this MENU to view/set to zero the machine cycle
counter
or those related to the User who logged
Logged-in User
counters:
-
control cycles performed by the User for all programs;
the first one can be reset by pressing the corresponding
icon
while
the second cannot be
To view/reset the counters of another User,
please log in to their
Machine counters:
-"Partial" counts the cycles performed by the machine
regardless of the programs; You can reset it by pressing
its icon
.
-"Short Cycle", "Long Cycle", "Special Cycle"
cycles performed by the machine for the related
it can be reset by pressing its corresponding icon
DIAGNOSTIC
This Menu allows the detection of any malfunction on the
machine and to run the "Test Mode".
key of the "secondary" MENU
Use the
Input-Output-Test mode
Come back to "secondary" MENU by pressing the key
or come back to "Home" MENU by press the key
.
- 11 -
in.
reset.
User.
counts the
program,
to enter the
submenu.
.
Advertisement
Table of Contents
