Table of Contents
Advertisement
70
6.7
Example communication
Received position:
Sent
GET;POSE
If this command is listed in a loop, a constant deflection or position monitoring of the SFE Tool Centre
Point may take place.
With this command, you can write many different programs, e.g. for joining.
Checking the version
The following communication may serve as an example for checking the current version of the
embedded software:
Sent
GET;VERSION
The version can only be updated via the desktop software.
You can find a more detailed description of the desktop software in the Initialization section.
Changing and checking the lock state
Sent
SET;MOT_LOCK_STATE;LOCK
GET;MOT_LOCK_STATE
Here, the first command is for locking, whereupon the SFE response states that the command was
received and carried out.
The second command is for querying the current status, whether the device is locked or unlocked. It is
locked in the example.
en
Interface description
Received
GET;POSE;-0.004|0.003|0.003|-
0.003|0.003|0.005;OK
Received
GET;VERSION;1.9.2
Received
SET;MOT_LOCK_STATE;OK
GET;MOT_LOCK_STATE;LOCKED
6
Advertisement
Table of Contents
