Electrical Components; The E-Box; Removal Of The Lcd Screen - Hitachi SAMURAI Series Service Manual
Condenserless water chillers
Hide thumbs
Also See for SAMURAI Series:
- Service manual (174 pages) ,
- Service manual (140 pages) ,
- Manual (118 pages)
Table of Contents
Advertisement
3. Servicing
Electrical components
3.4 Electrical components
3.4.1 The E-box
1 Turn the main switch off. If main switch is not
turned off it is not possible to open the door.
2 Open the E-box door using the provided key for
electrical box cam locks.
N O T E
When the right door is open, the left one may eas-
ily open by pulling backwards. When Ebox shall be
closed, remember to close the left door first.
3.4.2 Removal of the LCD screen
The removal of the LCD screen have to be done from the inner of the left door at the E-box.
1 Remove the wirings.
a. Remove the COM2 connector. Using a flat
screwdriver, loosen the 2 screws of the
COM2 port connector and pull backwards
the connector.
a. Remove the DC24V connector by pulling
backwards.
2 Using a Phillips screwdriver, loosen the 4 screws
fixing the LCD screen to the door panel.
3 For a correct removal of the LCD screen, follow
the next steps
1.- Loosen the screw
78
SMGB0097 rev.0 - 07/2015
2.- Push the hook
3.- Pull the hook backwards
COM2 port
connector
LCD power supply
connector
Screws
(x4)
Advertisement
Table of Contents
