6-19. Setting of HDMI Video (ZRCT-200 only)
When "HDMI1" or "HDMI2" is selected in the video input setting ([Input Select]), the factory setting is
as follows.
. [Dynamic Range]: Auto
. [HDMI Signal Format]: Enhanced Format
Change the setting as required. The setting is reflected on all display controllers including the sub control-
ler.
t
If the source equipment in the system does not support HDMI 2.0, change the setting to "Standard For-
mat" in [HDMI Signal Format].
1. Display the Main screen.
2. On the menu bar, click [Array], and then click [Input Settings]. (The screen varies depending on the
Display Control Software version.)
The Input Settings screen is displayed.
Screen example
6-54 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200