Viewing Generated and Captured Data
How to View Waveforms
Description of the Waveform Viewer Display
The Waveform Viewer comes up with a default configuration which can be
changed at will.
The figure below shows an example of a block which includes one data
input port (DataIn) and one data output port (Databus).
Figure 106
Waveform Viewer in Time Mode
Two traces show the code transitions and the generated and expected
codes in hexadecimal format.
The display provides two markers, A and B. Their current position and
distance is indicated in the lower left-hand corner. They can be moved with
the verniers or by dragging their handles along the ruler.
The column Val(A) shows the codes at the position of marker A. The literal
\h indicates that these are hex codes.
The current resolution is 10 ns/div but can be changed.
194
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1