Table of Contents
Advertisement
Viewing Generated and Captured Data
How to View Captured Test Results
In the address column, you can change the address display format (choices
are Decimal, Hexadecimal, or Octal) or choose the Go to option to specify
the start address of the display.
In the data display box, you can change the data display format. Choices
are Binary, Hexadecimal, or Octal.
In binary mode, each trace has its own column. In hexadecimal mode, four
traces are combined in one column (range 0 to F
). In octal mode, three
hex
traces are combined in one column (range 0 to 7
).
oct
Figure 101
Error State Display in Compare Mode
In Compare mode, the window provides three Go-to-Error buttons to move
quickly from one error to the next or previous.
How to Transfer Captured Data Into a Segment
Captured data can be saved in a data segment.
This makes it possible to use the response of a device as a reference for
future devices of the same kind. If the segment with the captured data is
used to specify the expected data for tests to come, the system precisely
measures all deviations from the gold standard.
There are two ways to transfer captured data into a segment. You can:
• Save the captured data as a new segment.
• Copy the captured data to the clipboard and then paste that data into a
segment.
190
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
Advertisement
Table of Contents
