Table of Contents
Advertisement
Setting Up Ports and Channels
108
Select a port and click OK to confirm.
The window that appears depends on whether you have chosen
• a DUT input port (data input port or pulse port)
or
• a data output port.
N O T E
Once the Parameter Editor has been started, it also provides a browser and
up/down arrows that enable you to switch to another item.
How to Start the Parameter Editor for Setting
Channel Parameters
To start the Parameter Editor for setting channel parameters, you have the
following options:
• If the Connection Editor is displayed, double-click the terminal in the
DUT section. Alternatively, you can also click on the terminal with the
right mouse button and select Properties.
• If the Connection Editor is displayed, you can also double-click the
channel identification in the module section. Alternatively, you can also
click on the channel identification with the right mouse button and
select Properties.
• Click the Parameter Editor icon in the tool bar
or
Choose Parameter Editor from the Go menu.
You get a list of all the items that have been configured and can have
parameters. The Parameter Editor needs your decision to branch to the
appropriate parameter window.
Figure 36
Parameter Editor Selection Window
Select either a terminal or a channel and click OK to confirm.
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1
How to Start the Parameter Editor for Ports/Channels
Advertisement
Table of Contents
