Port Link LED Is Not Lit
© Copyright Lenovo 2017
Symptom: The port link LED is not lit.
Solution 1: Check the port configuration in the firmware (see the Command
Reference). If the port is configured with a specific speed or duplex mode, check the
other device to make sure that it is set to the same configuration. If the switch port is
set to auto‐negotiate, make sure that the other device is set to auto‐negotiate.
Solution 2: Check the cables that connect the port to the other device. Make sure
that they are connected correctly. Make sure that you are using the correct cable
type.
Chapter 6: Troubleshooting
83