Statement 26
1.Locate, record, and retain the product switch information in order to configure and register your
product. See "Recording Important Product Information" on page
2.Attach a mounting bracket (Item 1) to each side of the switch with M4 screws (Item 2). Torque the
screws to approximately 2.0 newton‐meters (Nm) ± 0.1 Nm (17.7 inch‐pounds).
3.From the front, slide the switch into the rack at the desired height.
38
G8264 Installation Guide
CAUTION:
Do not place any object on top of rack‐mounted devices.
To install the G8264 in a standard equipment rack, complete the following steps:
Note: If this switch is a replacement switch, copy the product information
from the original switch onto the RID label that is shipped with
replacement switch and affix the new label to the bottom of the new
switch.
32.
1
2